Design for thermal performance of state of the art power module cooling infrastructure
Prodrive technologies is a developer and manufacturer of world-class electronics. It comprises over 1300 employees and is one of the fastest growing companies in Europe. Our organization is based on two groups: Development and Operations. The Development department is oriented at developing first-rate electronic, mechanic and software solutions. The operations department is responsible for production, assembly, testing and life-cycle-management of electronic products and systems in the range of 1 to more than a million pieces per year.
Within Prodrive, numerous products incorporate power modules and discrete semiconductor devices. These modules package power semiconductors and are often off-the-shelf products which are not typically optimized for thermal performance. In line with Prodrive’s ‘vertical integration’ way of working, we have started developing our own customised power module designs.
The power semiconductors generally dissipate a significant amount of heat due to switching and electrical conduction losses. The heat dissipation leads to the materials in the package heating up. The problem is increased by the pulsation of power leading to the power dissipation in the transistors to vary, resulting in significant thermal cycles. Due to the variation in thermal expansion coefficient of the materials in the module, changes in temperature induce stress both in and between the various layers. Hence, thermal cycling is the main reason that power modules will fail in time. In many products the power device is the limiting component in terms of lifetime and reliability, improving the design or cooling of the module therefore has a direct impact on wider system performance.
There are multiple methods to optimize the transistor (referred to as die) packaging, for example by minimizing the thermal resistance between junction to coolant, matching the thermal expansion coefficients of the materials used in the package, or by optimizing the design electrically to decrease the electrical losses. These solutions can lead to higher lifetime or higher power density when using the same die, or to lower cost for the same performance by using lower rated dies.
When moving from Silicon (Si) to Silicon Carbide (SiC) or Gallium Nitride (GaN) technology the heat flux significantly increases as the same power is dissipated over a smaller surface area. The smaller surface area leads to a shift in the contribution of each material layer to the total thermal resistance from die to coolant.
Investigate and develop a state of the art cooling infrastructure optimized with respect to thermal performance for Prodrive’s power devices.
- Present a literature review describing the state of the art in cooling technology for power devices.
- Offer an assessment of the following cooling infrastructures using finite element methods, numerical analyses, and experimental investigations:
- The most common coldplate within Prodrive, a Prodrive custom coldplate
- A pinfin baseplate (liquid cooled)
- Convection cooled extruded heatsink
- Investigate and develop a cooling infrastructure suitable for cooling Prodrive’s power devices optimized with respect to cooling performance given physical and electrical requirements.
- Demonstrate and compare the performance of the design through experimental verification and identify limitations, technical/manufacturing challenges and advantages.
Important note: all our graduation assignments are dependent on time. Please see them as an example of the many great things you can do at Prodrive Technologies. If you have the same passion for technology as we do, we always have an assignment for you!
Benefits as a student
Next to the benefits which are true for every Prodriver that are listed below, some special benefits must be highlighted for students. First of all you will be treated as a real Prodriver. Your opinion and ideas will be heard and treated as full. Next to this you will get the chance to work with colleagues with a very high level of knowledge in their field and get the chance to use our world class lab and production facilities for your graduation assignment.
When you are able to prove that you are the perfect fit for our job, you will be rewarded in many ways: you will get the chance to develop yourself as a person, gain extensive knowledge and develop your career in multiple directions. Your development will be guaranteed by your personal development plan which will be reviewed regularly. Besides that, you will – naturally – be offered a market competitive salary and outstanding secondary conditions. Your salary growth is in line with your own professional development so it can grow fast and you will even get the opportunity to become a shareholder. All this at an employer that has achieved an average annual growth of 25% over the last 20 years!
There are only few companies in the world of technology which stand out. According to our customers Prodrive Technologies is one of them. Our company was founded in 1993 by technical professionals from the Eindhoven University of Technology. Since then every year Prodrive Technologies has shown a steep growth rate due to a very successful business concept in a young and dynamic organization (average age 28 years). Currently the total Prodrive Technologies organization consists of over 1.300 (1.100 FTE) employees which are highly skilled, highly motivated and focused on results.
Apply for Design for thermal performance of state of the art power module cooling infrastructure
Thank you for your application!
An e-mail has been sent with further information.