Prodrive Technologies introduces its disruptive tailored bias waveform generator to provide direct control of the sheath ion energy distribution in plasma processing. The tailored waveform output offers independent control over current and voltage and is measured in real-time. This direct control of the sheath ion energy greatly enhances the control and precision of etch and deposition processes compared to conventional RF biasing, enabling customization of ion energy distribution to allow very narrow distributions and tail elimination. This results in optimized process speed and maximum selectivity for sensitive features. It also reduces the energy consumption of the biasing, increasing the efficiency of the system with respect to conventional technologies.
Specifications available upon request.Contact Us
This video schematically shows how tailored waveform biasing works.
Capacitively coupled plasmas are routinely used in an increasing number of technological applications, where a precise control of the quantity and the shape of the energy distribution of ion fluxes impacting boundary surfaces is required. Oftentimes, narrow peaks at controllable energies are required, e.g. to improve selectivity in plasma etching, which cannot be realized in classical discharges. We combine experimental ion flux-energy distribution measurements and PIC/MCC simulations to provide insights into the operation and ion acceleration mechanisms for discharges driven by square-shaped tailored voltage waveforms composed of low-frequency (100 kHz) pulsed and high-frequency (27.12 MHz) signals. The formation of ion flux-energy distributions with a narrow high energy peak and strongly reduced ion fluxes at intermediate energies is observed. The position of the high energy peak on the energy axis can be controlled by adjusting the low-frequency voltage pulse magnitude and duty cycle. The effects of tailoring the driving voltage waveform by adjusting these control parameters as well as its repetition rate on the plasma operation and the ion flux-energy distribution are analysed in depth. We find, e.g. that the duty cycle regime (<40% or >60%) determines if the high energy ions form at the grounded or the powered electrode and that the duration of the pulse must exceed the ion energy relaxation time, on the order of 0.5 μs.Go to Publisher's Page
For atomic scale plasma processing involving precise, (an)isotropic and selective etching and deposition, it is required to precisely control the energy of the plasma ions. Tailored waveforms have been employed to bias the substrate table to accurately control this ion energy. Recent research has shown that switched-mode power converters can be used to generate this kind of waveform, with the benefit of increased energy efficiency and flexibility compared to the traditionally used linear amplifiers. In this article, an improved equivalent electric circuit model of the plasma reactor is proposed to allow simulation and bias waveform optimization. The equivalent electric circuit is analysed for different process phases, including the charge, discharge, and post-discharge phase. The proposed model is suitable for electric circuit simulation and can be used for predicting the electric waveforms and ion energy distributions. Plasma parameters are required as input for the model, thus an empirical parameter identification method based on the electrical measurements of the bias voltage and output current waveforms is introduced. Since these electrical measurements do not interact with the plasma process, the proposed parameter identification method is nonintrusive. Experiments have been carried out, which demonstrate that the proposed model and parameter identification method provide the expected accuracy.Go to Publisher's Page