Prodrive Technologies logo white Prodrive Technologies logo
EN 中文 |

Contact Us

Thank you for your reaction. We will contact you soon.


Product navigation

Phoenix series

Ironless motors for applications requiring a high positioning accuracy, linearity and bandwidth over a long stroke.

Our long stroke ironless motors are designed to achieve high precision motion and force control for both moving coil or moving magnet applications due to the absence of force ripples and attraction forces. Various force levels and form factors are available with optimized steepness. By means of applying PCB technology within our linear motors, the integration of a connector within a small packaging allows for an easy and fast servicing. Additionally, the integration of thermal sensors or Hall sensors for position sensing can be achieved with minimal cost. Magnetic shielding can be considered as an option as well as vacuum compatibility.

Contact Us
Prodrive_Technologies_Motion_Mechatronics_Ironless_1.jpg
Customization
High linearity
No attraction force
No force ripple

Configuration

Vacuum Compatibility.png

Vacuum compatibility 1e-7 torr

Actuators complying with 1e-7 torr use special coatings, connectors and adjusted mechanical geometry. Design is verified by inhouse RGA.

Intregrated Connector.png

Integrated connector

An integrated connector allows for easy installation and servicing without the need to remove the cabling.

Integrated Positioning Sensing.png

Integrated position sensing

An integrated position sensor based upon Hall sensor measurements can be included. It can both be used for position control and commutation.

Cooling.png

Forced air or water cooling

Forced cooling by means of pressurized air or water can be integrated into the stator depending on customer requirements.

Magnetic Shielding.png

Magnetic Shielding

Magnetic shielding can be added optionally depending on customer requirements. The shielding will be designed to minimize performance impact.

Vacuum Compatibility.png

Vacuum compatibility 1e-8 torr

Actuators for 1e-8 torr have additional metal housing around the coil unit to eliminate any outgassing of epoxy materials. Design is verified by inhouse RGA.

More photos