Prodrive Technologies logo white Prodrive Technologies logo
EN 中文 |

联系我们

谢谢您的反馈。 我们将尽快和您联系。


产品

XPCS系列

我们的超高精度电流传感器为电流测量树立了新标准

此系列电流传感器可以用于多种高要求应用。例如,我们的 60A 版本允许以更高水平的准确度、性能和可靠性控制系统。此传感器按照我们的 0 维护原则设计:无需单独校准传感器,性能极为可靠。

另一方面,1200A 版本具有现有高精度电流传感器的最高额定电流。可无缝安装在用于 MRI 应用的现有或新梯度放大器系统中。独特技术提高了电流测量的准确度,实现的图像质量和可靠性超出行业标准。XPCS-1200 是浦卓科技在高精度电子元件方面 20 年行业标杆的体现。      

联系我们
Prodrive-Technologies_Power_Conversion_Power_Components_XPSC-1200_2.jpg
超高线性和高精度零通量闸门传感器
低噪音
0 维护
电流过载保护

技术规格

Functional

     
  Typical Unit
Current range 440 Arms
  ±1200 Apk
Linearity 3.3 ppm
Flatness up to 1 kHz 0.01 dB
Bandwidth (45 deg 800 kHz
Noise floor <10kHz 500 nA/√Hz
Noise 1/f corner 20 Hz
Isolation 5 KVrms

Certifications & Standards

     
IEC-60601 2 x MOOP (Means of Operator Protection) 
External CLK input Synchronization   

Interfaces

 
- Shielded SUB-D 9pin connector for secondary circuits
 - Operation Status: if sensor is in normal operation state and no overcurrent has occurred, pin 2 is pulled down.
- Sync Status: if sensor is synchronized with the provided external signal, pin 8 is pulled down.
 - Power Supplies: +/-15V (+/-5% tolerance)
- Current Output: ISEC is positive when IPRIM flows in the direction shown by the arrow
- SMA connector for external synchronization signal (TTL)
- Green LED that is ON during normal operation and OFF if any error occurs

Status and MOQ

This product range is not available separately but is shown here to demonstrate what can be achieved. However, we will gladly discuss any projects where there is a need for this level of accuracy.

No MOQ applicable