|
Cygnus 电机驱动器配备性能强大的集成运动控制器并具有多种连接选择。这使得 Cygnus 成为许多应用的理想选择。由于内部采用 EMC & EMI 配置，加上集成输入/输出滤波，Cygnus 可以用最少数量的外部组件工作，并可以通过 Ethernet 或使用兼容 CiA402 的 EtherCAT 接口控制驱动器。
Cygnus 驱动器采用可编程浦卓运动平台Prodrive Motion Platform (PMP)。PMP 平台非常灵活，目前应用于多个行业。运动控制器可以通过强大的 Motion API (C++/C#) 集成在要求最严格的系统中。自定义实时代码可以通过 Simulink 代码生成部署。PMP 工具提供先进的信号跟踪功能和完全可定制的 HMI 界面，支持快速轻松调试。
联系我们
Module is available in several current ratings.
Various mounting brackets are available allowing both surface mounting and rack mounting of the device.
Drive can be used in real-time industrial networks as EtherCAT and CANopen, or can be commanded via the Ethernet-based PMP interface.
| Series | Cygnus | Cygnus | Cygnus | |
| Model | Q3-48/10 | S3-400/8 | D3-400/4 | |
| Power input | ||||
| Input voltage range | 10 - 54VDC | 390 - 410VDC | 390 - 410VDC | |
| Input voltage, abs max | 60VDC | 450VDC | 450VDC | |
| Input current | 30ARMS | 10ARMS | 10ARMS | |
| Input current, peak | 50APK | 20APK | 20APK | |
| Auxiliary input voltage | 21-26 VDC | |||
| Auxiliary input current | max 3A | |||
| Actuator outputs | ||||
| Number of motor outputs | 4 | 1 | 2 | |
| Supported motor types (linear and rotary) | stepper, 1-phase (voice coil) 3-phase (PMSM/Reluctance/Induction/BLDC) |
|||
| Maximum phase current | 10ARMS | 8ARMS | 4ARMS | |
| Peak phase current (1s) | 20ARMS | 16ARMS | 8ARMS | |
| Maximum output voltage (line-line, typical) | 0-30VRMS | 0-250VRMS | 0-250VRMS | |
| Rated switching frequency | 16-20kHz | |||
| Output frequency | 0-700Hz | |||
| Internal brake resistor | N | |||
| External brake resistor | Y | |||
| Encoder inputs | ||||
| Number of encoder inputs | 4 | 1 | 2 | |
| Supported types | Digital quadrature (A/B/I) Analog sin/cos 1Vpp (12bit) Digital hall (5V) EnDAT 2.1/2.2 Hiperface DSL 2- / 4-wire BiSS C SSI |
|||
| Maximum signal fequency with no missing pulses | 4MHz | |||
| Maximum baudrate (digital encoders) | 32MHz | |||
| Encoder supply (each input) | 5V 500mA / 10V 500mA | |||
| General purpose inputs/outputs | ||||
| Isolated digital inputs | 4 x 24V input (VIH≥11V, VIL≤5V, IIN<15mA) | |||
| Isolated digital outputs | 2 x 30V / 500mA | |||
| Non-isolated digital inputs | 3 x TTL (shared with digital hall) | |||
| Non-isolated digital outputs | 4 x 24V - 2A | |||
| Analog inputs | 1 x ±10V differential input, 10bit | |||
| Analog outputs | - | |||
| Brake outputs | 2 x 24V - 2A | |||
| Control | ||||
| Interface | Ethernet / EtherCAT / RS485 (50MBps max) / CAN | |||
| Update rate | 100Hz - 20kHz | |||
| Performance | ||||
| Offset error [%of Ipk] | ||||
| Offset drift [%of Ipk] | ||||
| Gain error [%of Ipk] | ||||
| Gain drift | ||||
| Linearity error [ppm of Ipk] | ||||
| Current loop, small signal bandwidth (-3dB) | Typical 600Hz – 1kHz | |||
| Output current noise spectral density @100Hz | ||||
| Output current noise, rms 1Hz-10kHz | ||||
| Output current noise, rms 1Hz-20MHz | ||||
| Functional safety | ||||
| Applicable standard | IEC62061:2010 | |||
| STO | SIL3 (certification pending) | |||
| SBC | SIL3 (certification pending) | |||
| Electrical safety | ||||
| Applicable standard | IEC/UL61800-5-1 | |||
| Pollution degree | 2 | |||
| Overvoltage category | III | |||
| IP-protection class / enclosure type | IP20 / open type | |||
| Maximum altitude during operation | 2000m above mean sea level | |||
| EMC | ||||
| Applicable standard | IEC61800-3 | |||
| Input filtering | CM+DM, cat C2, 2nd env. when used with listed power supply | |||
| Output filtering | Clamped LC filter (dV/dt limiting) + HF output filter | |||
| Mechanical & Climatic | ||||
| Dimensions (width x depth x height) | 73mm x 195mm x 265mm | 90mm x 195mm x 265mm | 90mm x 195mm x 265mm | |
| Mass (typical) | 3 | 3.3 | 3.3 | |
| Operating temperature range | -5°C - 45°C | |||
| Operating humidity range | 0-90% non-condensing | |||
| Shock&Vibration | IEC61800-5-1, IEC60068-2-6 (Fc) | |||
| Lifetime | >10 years | |||
